Photovoltaic PV Sensor
Automatically adjusts the LED light output in response to ambient light levels. The LED output to ambient light level matrix is fully programmable.
Automatic LED Temperature Control
Will automatically reduce if the PN junction exceeds the set operating temperature.
PIR Movement Sensors
Used to trigger a single light or a group of lights in common or multiple areas. Ideal for storage facilities. Wirelessly controlled no need for cabling between lights.
Lighting Schedules
A range of 32 schedules can be programmed facilitating various power saving modes. Schedule 24/7 on/off dimming etc.
Radio Control
Full remote control of all parameters is possible from a control PC via a radio interface. No need for cables or access equipment. No cost for data.
Advanced Control
Include fault reporting, 1- 100% dimming from any output power, ramping power timer and system diagnostics, alarms, history, ramping from 0 seconds¡ª2 hours, admin, etc.
Colour Rendering
Our standard package has Ra ¡Ý 75.
Settings
All settings are programmable allowing for 100% light customisation.
Rotation LED Module & variable optics
Various optics can be applied and used in conjunction with the rotational LED modules on the light to maximise the light output, allowing the light to be aimed where needed potentially allowing for the light to be dimmed further to save power.
Note: If brighter Streetlights are required then two Streetlight fixtures per pole can be used
RM = Remote Control NR = Programmable Stand Alone
LED Design Life 57,000+ hours - 10+ years
